FTDXRC is a 64-bit application developed under Windows 10. FTDXRC is freeware. FTDXRC is provided "as is". I will not give any support in any form. I read your mails and suggestions but I never do answer any support requests! If you agree on that you may download, install and use FTDXRC.
Legal disclaimer: This software is in daily use at the software author. The author of this software cannot be liable for any damage to your transceiver under any circumstances.
- A YAESU FT DX 5000, FT-2000 or FT-950.
- FTDXRC runs under 64-bit versions of Windows© 10 (and 7, 8).
- Minimum requirement is a screen resolution of 1280 x 800 pixel in Wide Mode, 1033 x 800 pixel in Compact Mode and 1033 x 549 in Basic Mode.
Version and Download
FTDXRC is available as:
|64-bit application||3.2||August 2, 2020||only 64-bit versions of 7, 8 and 10||Download 64-bit installer||Please read the Release Notes|
|32-bit application||2.8||June 12 , 2019||32-/64-bit versions of XP, Vista, 7, 8 and 10||Download 32-bit installer||Last available 32-bit version|
FTDXRC should be installed in Windows Administrator mode.
Upgrading from previous FT2000RC V2 to FTDXRC V3
If you have a FT2000RC (32-bit) installation and upgrade to FTDXRC, all previous settings from a FT2000RC installation can automatically be imported. FT2000RC can be deinstalled afterwards if you wish.
FTDXRC was originally designed only for the FT-2000 in 2008. The CAT commands are rather similiar with other YAESU HF transceivers so I decided to develop also a user interface for the FT-950 and FT DX 5000 (which has been pretty much work!). I have no FT-950 and had to develop the interface without being able to test it with a real radio. E-mail me if something shouldn't work as expected (my e-mail address is on QRZ.com).
If you are using the software and find it useful please consider a donation to this project to cover my expenses for development tool upgrades.
- RemAud - Low Latency & Low Bandwidth Amateur Radio VoIP Software: df3cb.com/remaud/