DF3CB.com :: Software
RemAud - Remote Audio Software
Documentation

Client Setup - General

If you check the Auto-connect checkbox you can auto-connect to the audio server when the client application is booted.

Settings client general

If you key the PTT of your transceiver over a serial port as defined in the Server Setup - PTT, you must check the Use PTT option. RemAud Client will send a PTT signal to the server when you invoke the audio transmit function (click on the Microphone button or use the shortcut key T).

The audio stream received from the server can be muted while transmitting using the PTT function to avoid possible loopbacks. Check the Audio Server Playback option.

Back to Documentation | Next: Client Setup - Remote Connections